Good Old Fashioned Bunting


Welcome to our 'Good Old Fashioned' Bunting tutorial!
We came up with this pattern together as we like nothing more then to have a nice bit of bunting jazzing up our apartment ;-)
We hope you find our tutorial easy to follow, but if you do have any questions, feel free to contact us in the comment box below.

Materials:
Yarn: We've used 5 colors of Rico Baby Cotton Soft DK (obviously you can use any yarn you want, bulky for big bunting, and dk for smaller)
Hook: We've used a 4mm hook. We advise you to use a smaller hook to make your bunting hold it's shape a little better.
Darning Needle: For all of those pesky ends.
Starch and blocking pins (optional)



Round 1

Chain 13, dc in 4th chain from hook. (We've popped a needle through the 4th chain to show you where to make your first dc)


dc in the next 8 ch. You should end up with one ch left.


In the last ch, make (3 dc, ch 2, 3 dc)
In the picture below we have just completed 3dc and ch 2. We still have 3 dc to go in the same stitch.


You will notice that your work has started to turn the corner. This is good as we are going to be working down the other side of the chains.


dc in each of the remaining 9 bottom loops. The picture below shows you where to put your hook.


At the end of the first round, your work should look something like this.



Round 2

ch 3 (counts as 1 dc) Turn your work.



dc in the next 9 stitches.


3 dc in the next stitch


dc in the next two stitches.


If it's all gone according to plan, we should have reached the ch 2 loop from the previous round.
In the ch 2 loop, make (2 dc, ch 2, 2 dc)


dc in the next 2 stitches.
3 dc in the next stitch.
dc in the remaining 10 stitches.

That wasn't so bad now, was it? Hopefully it looks like this.



Round 3

ch 3 (counts as 1 dc) Turn.
dc in the next 10 stitches.
3 dc in the next stitch. (This should be the middle stitch of the 3 dc of the previous round.)


dc in the next 5 stitches.
In the ch 2 space from the previous round, make (2 dc, ch 2, 2 dc).
dc in the next 5 stitches.
3 dc in the next stitch.
dc in the remaining 11 stitches.

Round three complete!! How's it looking?


Round 4

There are not so many pictures in this round as it works basically the same as round 3.

ch 3 (counts as 1 dc) Turn.
dc in the next 11 stitches.
3 dc in the next stitch.
dc in the next 8 stitches.
In the ch 2 space from the previous round, make (2 dc, ch 2, 2 dc).
dc in the next 8 stitches.
3 dc in the next stitch.
dc in the remaining 12 stitches.
Faten off. (Don't fasten off if you want to keep the edging the same colour.)



Round 5

For this round we chose to change colour, as we think it makes the edging pop! However, feel free to keep going in the same colour.

Join a new colour of yarn. We did this by making a simple knot.



To start working with the new color, pull your yarn through the last stitch of the previous round.
ch 1 (does not count as a sc)


sc in the same stitch. (We chose to work our sc's on top of the loose ends so we don't have to sew them in later)


sc in the next 12 stitches
(After these 12 stitches you can cut off the loose ends. They should be nice and secure by now)


3 sc in the next stitch.
sc in the next 11 stitches.
In the chain 2 space make (2 sc, ch 2, 2 sc).


sc in the next 11 stitches.
3 sc in the next stitch.
sc in remaining 13 stitches.


Fasten off. Even though we'll be working with the same color in the next round, the edging pattern calls for working in the same direction as the previous round. No turning of the work this time. 

Round 6

We are using the same colour yarn as in the previous round.
Begin by pulling your yarn through the very first ch we made in the previous round. (You can see it clearly in the picture. Where we have put our needle is where you will join the yarn).


In this round we are always working out of the back loops of the stitches from the previous round.
(You can see the back loops in the picture below, as indicated by our needle).


Slip stitch in the next 2 stitches (remember working out of back loops only).


*In the next stitch make (1 sc, ch 2, 1 sc).  sl st in the next 3 stitches* repeat between ** 5 times


You should have 3 stitches remaining before the ch 2 space of the previous round.
In the next stitch (sc, ch 2, sc). sl st in the next 2 stitches.


In the ch2 space of previous round (which may be a little tricky to spot). Make 1 sc, ch3.


Now we are going to make a sl st at the base of the chain 3 we just made. It might be a bit tricky to find, but take a look at our picture. The needle indicates where to put your hook. You've just made a picot, how fancy!
Make 1 sc in the same ch 2 space (in this space you should have made: 1 sc, 1 picot, 1 sc).


sl st in next 2 stitches.
*In the next stitch make (1 sc, ch 2, 1 sc).  sl st in the next 3 stitches* repeat between ** 5 more times.

In next stitch (1 sc, ch 2, 1 sc)
sl st in remaining 2 stitches.
Fasten off.
Tie the two loose ends together.



Sew in all loose ends.


Finishing off and Joining

Once we had made our desired amount of bunting we decided to block the pieces and spray them with a light water and starch solution. This will help them to hold their shape a little better.


This is really up to the individual. I guess you just have to get a feel for how floppy your bunting pieces are and also the look you are going for. I personally love the look of the bunting when it is not 100% flat, it almost adds a little personality to it.

There are many ways you could join these little beauties. Feel free to experiment and get creative with them.
We chose to join ours like this:

Ch 30

Sl st into first ch to form a loop. (We made the loop for convenience when hanging).


Ch 10
Now we are going to dc into the bunting. Hold the ch tight and yarn over hook (like in the picture).


Place your hook under the dc of round 4, like in the picture.


Now make your dc. Make 2 more dc in the same space.


Now make 3 dc going under the dc from round 2, like in the picture.


3 dc in the very middle of your bunting. We chose the middle ch.

Mirror what you have done on the other side. You will end up with five 3dc clusters along the top of your bunting.


Ch 10 (can be less or more depending on how far away you want your buntings to be spaced from each other)
Repeat the five dc clusters in each of your remaining buntings.
Once you have attached your last piece, Ch 40 and sl st in the 30th chain from hook to form a loop.
Sew in any loose ends.


You have just made yourself your very own 'Good Old Fashioned' Bunting! Now go hang it up and admire! (Maybe with a 'good old fashioned' cup o' tea and some cookies).

Go ahead and experiment with different colors, make yourself a Christmas version, an "It's a Boy" version, or whatever tickles your fancy! Have fun!


 and Dennis xxx

5 comments:

  1. Thank you for this comprehensive tutorial on bunting making. Bunting's a great way to show some Handmade Love !~!

    ReplyDelete
  2. Absolutely divine! Thank you

    ReplyDelete
  3. This is so nice , I surely make one. Your blogs are awesome. - vinucrochet.blogspot.in

    ReplyDelete
  4. Whow ! that look nice ! and so simple ef i see the pictures.
    I surely make them for my kids, so cute..

    Thanks.

    ReplyDelete
  5. Wow, a great idea¡ Love your work

    ReplyDelete

Thank you so much for leaving me a comment!